Shielded computer rooms are an important protective measure for electronic equipment. Due to the serious electromagnetic wave pollution nowadays, setting up shielded computer rooms in areas with a large number of electronic equipment can effectively prevent electromagnetic waves from interfering with the equipment in the computer room. The shielded computer room consists of many parts, such as its walls, movable doors, floors, and so on. In order to ensure good ventilation in the shielding room, people also need to add a ventilation waveguide window above the shielding room, which is a device used for air exchange. However, in addition to meeting the ventilation requirements, this device also needs to have strong shielding requirements. Below, the editor will introduce the process characteristics of ventilation wave guide windows to you, so that you can understand how they achieve effective ventilation and shielding.
Process characteristics of ventilation waveguide windows in shielded machine rooms
1. The ventilation waveguide window adopts a fully welded mode for welding, which has excellent connection performance and almost no obvious vulnerable areas. Therefore, it is very suitable for use in shielded machine rooms with high protection levels.
2. The ventilation waveguide window adopts a honeycomb structure with strong and sturdy characteristics. The hexagonal honeycomb shaped ventilation waveguide window has good filtering effect. Some places with higher shielding levels will also use double-layer waveguide filtering windows.
3. The material used for the ventilation waveguide window is a metal material with strong electromagnetic shielding ability, which has good conductivity and magnetic conductivity. Therefore, general signals are not easy to enter when in contact with this high-density honeycomb structure ventilation waveguide window.
4. The ventilation waveguide window dedicated to the shielding machine room has the characteristics of light weight, low wind resistance, convenient installation, good ventilation and breathability, and has very important practical significance.
After introducing the process characteristics of the ventilation waveguide window, it is not difficult to see that it is indeed much better than ordinary ventilation windows, and the process difficulty is even more complex. The purpose of setting up a shielding room is to ensure that there is no leakage, so that external electromagnetic waves cannot enter, and the electromagnetic signals inside will not be received by the outside world. Such a highly demanding room naturally requires quality control of every part. You can come and learn about our shielding room facilities. If you feel the need, you can contact our staff to make a purchase.
